Galmet Keytite Etch Primer | Galvanised Steel Paint Primer

Before using Galmet Keytite Etch Primer, always refer to the Technical Data Sheet for full instructions. The following overview is intended as a general application guide.

1. Surface Preparation

Ensure surfaces are clean, dry, and free from contaminants such as oil, grease, or dirt. Remove any loose rust, paint, or corrosion by wire brushing, sanding, or abrasive blasting as appropriate for the substrate.

2. Application

Apply Galmet Keytite Etch Primer evenly using a brush, roller, or spray equipment. Mix thoroughly before use to ensure even pigment distribution. Avoid over-application to maintain optimal film build.

3. Drying and Recoating

Allow the primer to dry thoroughly before applying a topcoat. Under normal conditions, Galmet Keytite Etch Primer can be recoated the same day. Compatible with most single-pack, two-pack, and industrial topcoats -  always refer to the Technical Data Sheet to confirm system compatibility.