Devcon Plastic Steel Putty (A) | Steel Putty for Metal Repair

Steel-Filled Epoxy Reinforcement
Plastic Steel Putty (A) incorporates steel reinforcement within the epoxy formulation. This creates a repair material capable of rebuilding worn metal surfaces while maintaining structural strength after curing. The reinforced formulation helps ensure repaired components can continue operating under typical mechanical loads.

Strong Adhesion to Prepared Metal Surfaces
Reliable adhesion is critical when rebuilding damaged equipment. Plastic Steel Putty (A) is formulated to bond strongly to prepared metal substrates, with an adhesive tensile shear strength of approximately 2800 psi. This helps ensure the repair remains securely attached during equipment operation.

High Compressive Strength for Equipment Repairs
Industrial machinery often places compressive loads on repaired surfaces. The cured compound provides a compressive strength of around 8260 psi, allowing the material to rebuild worn equipment surfaces and restore the structural integrity of damaged components.

Non-Sag Putty Consistency
The putty consistency allows the material to stay in position during application. This makes it suitable for vertical, overhead and irregular surface repairs where liquid epoxies may run or pool. The consistency also allows technicians to shape the repair during application.

Machinable After Cure
After curing, the material forms a hard surface with a hardness of approximately 85 Shore D. This allows the repaired area to be machined, drilled or finished if required to restore proper equipment tolerances or alignment.

Suitable for Industrial Maintenance Environments
Plastic Steel Putty (A) is designed for maintenance repairs where durability and controlled curing are required. With a pot life of approximately 45 minutes and a functional cure of around 16 hours, the compound provides workable application time while supporting planned maintenance schedules.