Devcon Aluminium Putty (F) 0.5kg

Aluminium-filled formulation for aluminium repairs

Devcon Aluminium Putty is formulated as an aluminium-filled epoxy putty for repairing and rebuilding aluminium parts, castings, machinery and equipment. It is designed for applications where an aluminium repair material is required rather than a general-purpose alternative.

Non-rusting repair material

The product is used where a non-rusting repair is preferred. This is especially relevant for aluminium components, castings and equipment where the repair material needs to suit the substrate and intended service environment.

Putty consistency for controlled application

Because it is a putty-grade material, Devcon Aluminium Putty can be pressed and shaped directly into damaged areas during application. This supports controlled repair work on localised defects such as chipped sections, worn areas, casting voids and surface imperfections.

Suitable for vertical surface repairs

The product can be trowelled onto vertical surfaces up to 1/4 inch thick without sagging. This makes it useful where the repair area is not flat or horizontal and the material needs to stay in place during application.

Can be machined, drilled and tapped after cure

Once cured, Devcon Aluminium Putty can be machined, drilled or tapped using conventional metalworking tools. This is useful for repairs that need follow-up finishing, reworking or adjustment before the part is returned to service.

Can be painted after full cure

After full cure, the repaired area can be painted if required. This gives maintenance teams and workshops more flexibility where the repaired component needs a finished surface as part of the overall restoration process.

Suitable for filling voids and pores in castings

Devcon Aluminium Putty is suitable for filling voids or pores in castings. This makes it a practical option for restoring cast aluminium components where localised defects or surface imperfections need to be patched before service or finishing.

Used for repair and workshop applications

In addition to aluminium equipment repairs, the product is also used for making jigs, dies and holding fixtures. This extends its use beyond plant maintenance into workshop and fabrication support applications where a shapeable aluminium-filled epoxy is required.